Categories
Contact Us

Tel: +86-15621456379
Fax: +86-532-83122597
E-mail: mike@sinorubbermach.com

Add: Kangxing Road 108, Wangtai Town, Huangdao District, Qingdao City, Shandong, China

Service Hotline
+86-15621456379

Exhibition

Home > ExhibitionContent

High Quality Rubber Internal Mixer (XSN35)

Basic Info

  • Model NO.: XSN35

  • Customized: Customized

  • Weight: <50 tons

  • Type of Tire Machinery: Rubber Regeneration Machinery

  • Using Life: ≥15 Years

  • Type of General Rubber Machinery: Kneader

  • Mixing Chamber: Hard Chromium and Polished

  • Specification: ISO9001&CE

  • HS Code: 84778000

  • Certification: ISO, CE

  • Voltage: 380V

  • Type: General Rubber Machinery

  • Power: 10~100KW

  • Warranty: 2 Years

  • Rotor: Hard Alloy with Excellent Abrasion Resistance

  • Trademark: XINCHENG

  • Origin: China

Product Description

Rubber Internal mixer, Kneader, Banbury mixer & ( Version: XSN-35, 55, 75, 110)

Main Features:

1. The spiral angle and the working length of the wing of the rotors are designed intelligently and reasonably, which can make the materials obtaining an optimal kneading effect. The wing ridge and the end surface of rotor are bead welded with the abrasion resistant hard alloy and the faying surface of mixing chamber, rotor and upper ram which directly touching with the materials are all polished after being ground and plated with hard chromium.

2. The mixing chamber consists of W-shape body welded with high quality steel plates and two pieces of side plates. The chamber, rotors and piston ram are all jacketed structure for the ingoing of steam, oil and water for heating and cooling to suit the various requirement for the process of mixing and plastication.

3. Hard toothed surface gear reducer for higher working efficiency, lower noise, wearing resistance; Well-known brand motor with 20 years guarantee.

4. PLC control.

5. Hydraulic pressure turning device adopts the enveloping worm pair to perform high efficiency and bearing strength. The discharging of materials can be carried out consecutively without stop, which avoids the starting up of motor frequently.

6. Chamber is well-sealed by the arc-shaped-plate-groove labyrinth type structure and the shaft end of rotor adopts contact type non-lubricating with spring tightening structure.

7. Temperature adjustable by electric control system; Pneumatic system can protect the motor from the overloading of chamber.

8. Plug-in type thermal resistor can be equipped in the bottom centre of mixing chamber and is connected with the electric-control system.

9. Operation safety, Materials good mixing dispersion, Environmental protection.    

  Version &     ParametersXSN-35/30XSN-50/30XSN-75/30XSN-110
Mixing  capacity  (L)355575110
Main Power(kw)557590160
Brake Motor (kw)2.23.04.05.5
Tilting angle14.014.014.014.0
Air compressor (kw)5.57.51010
Dust collectorHLL-10HLL-15HLL-20HLL-30
Cooling water (MPA)0.3-0.40.3-0.40.3-0.40.3-0.4
Heating Steam (MPA)0.5-0.80.5-0.80.5-0.80.5-0.8
Electric Heater (kw)12151824
Overall Size L× W× H (mm)3200× 1900× 29503750× 1950× 30503760× 2143× 30503930× 3000× 3660
Weight(kg)650078001050015000