Categories
Contact Us

Tel: +86-15621456379
Fax: +86-532-83122597
E-mail: mike@sinorubbermach.com

Add: Kangxing Road 108, Wangtai Town, Huangdao District, Qingdao City, Shandong, China

Service Hotline
+86-15621456379

Exhibition

Home > ExhibitionContent

Xk-160 Laboratory Rubber Mixing Mill

Basic Info

Product Description

  • Model NO.: X(S)K-160

  • Control Type: Manual

  • Power Source: Electric

  • Trademark: XINCHENG

  • Specification: 1080x796x1415

  • HS Code: 8477800000

  • Warranty: 1 Year

  • Automatic Grade: Manual

  • Type: Rubber Mixer

  • Transport Package: Wooden Case

  • Origin: Shandong

Application:
1:This machine is mainly used in Rubber & Plastic Product factory for Natural Rubber Mixing(plasticating), Raw Rubber and Compound mixing, rubber warm-up mixing and pressing sheets;
 
2:The XK-160 Laboratory Mixing Mill is widely used in laboratory to do the test before the production in bulk or used by small enterprise. 
 
 
Features:
1. Roller:The roll is made of alloy chilled cast iron ,so the surface is hard and wearable;
2. Overload:This Rubber Mixer has overload  protection devices, Machine will be stopped automatically, if overloaded
3. Emergency stop:Perfect emergency stop device can ensure the safety of personnel and equipment.
   *Must have the electrical emergency stop pushbutton
   *Must install the emergency stop pull rod at the top of rollers (front side and rear side)
   *Must install the brake device on the motor outlet end, and the brake device must be reliable acted when push down the emergency stop pushbutton or emergency stop rope and the machine stop running.
4.Stock pan:stock pan is easy to clean up with dislodging device.
5. Gear box:The transmission system adopts ZQ Series,Hard Tooth Surface Reducer Series, Planetary Reducer Series,etc,
6. Easy Operate:Human nature designed operating system reduces labor intensity.
7, Cooling system:circulation of steam and cooling water can be through rollers to control the temperature
8, Safe electrical part: All electrical connections are safe:short circuit is not possible by any means
Technical Data.

Serial No.ItemsSpecifications
01ModelXK-160
02Roll Diameter(mm)160
03Working Length of Rolls(mm)320
04Linear Speed of Front Roll(m/min)11.24
05Friction Ratio(F/R)1:1.35
06Max. Roll Gap(mm)4.5
07Capacity Per Batch(kgs)1-2
08Driving Motor Power(KW)7.5
09Overall Demension(LXWXH)(mm)1080X796X1415
10Cooling MethodBy Water
11Main BearingsSperical Roller Bearing
12Gross Weight(kgs)1000

Working Principle:
The Glue Stock on the two rollers rotating reversely with different linear speed is pulled in the nip of the two rollers by the frictional force,with the reduction of the friction surface through the rollers,it is cut and extruded strongly;in the mean time,the chain scission and oxidation occurs under a certain temperature condition,increasing its plasticity,the aim of milling achieve.